Samsung Galaxy A10s A107F Speaker Problem

Ring speaker is the part that can make a sound on the phone when we make calls, play videos, listen to music, play games, listen to recording results and other devices. In this guide, we will discuss how to troubleshoot Samsung Galaxy A10s sound problems. If your phone has no sound or you are having sound and volume problems of any kind then here are some things that you can try.

Solution to fix Samsung Galaxy A10s SM-A107F speaker loss problem

1. Check the speaker bell

The first step can be done to test the speakerphone part of the Samsung Galaxy A10s A107F smartphone. Take measurements using a multimeter, when the measurement results show that the speaker is damaged.

Immediately replace the part with a new one, this may be one of the causes of the speaker not making sound.

2. Check components and replace

For the remedial steps in this way, can be done according to the listed schematic image, check all the components located in the path of the Ring Speaker section, take measurements, if found components Faulty parts are immediately replaced with new parts of the same value.

Samsung Galaxy A10s A107F Speaker Problem

And also check the path, if it is found that the paths are damaged, broken due to rust and corrosive water, you can proceed to connect the conductors to make the speaker path condition back to normal.

3. Replace the Audio IC

After checking the speaker part of the bell, components, and paths, the condition is still good. Most likely damaged IC Audio, Ic Audio is the chip component that emits the sound of the speaker.

To perform component replacement, wire fishing or audio IC switching, please do so carefully.

That is information and solutions to fix Samsung Galaxy A10s A107F Speaker Problem. Hope this information can be useful to all of you, thank you.

Location:

Share :